Information about

Sprinkler Irrigation System

An irrigation sprinkler (also known as a water sprinkler or simply a sprinkler) is a device used to irrigate agricultural crops, lawns, landscapes, golf courses, and other areas. They are also used for cooling and for the control of airborne dust. Sprinkler irrigation is the method of applying water in a controlled manner in way similar to rainfall. The water is distributed through a network that may consist of pumps, valves, pipes, and sprinklers.

Irrigation sprinklers can be used for residential, industrial, and agricultural usage. It is useful on uneven land where sufficient water is not available as well as on sandy soil. The perpendicular pipes, having rotating nozzles on top, are joined to the main pipeline at regular intervals. When water is pressurized through the main pipe it escapes from the rotating nozzles. It gets sprinkled on the crop. In sprinkler or overhead irrigation, water is piped to one more central locations within the field and distributed by overhead high pressure sprinklers or guns.

Overhead sprinkler with3/4″ BSP/NPT male threaded connection and 27o trajectory angle. Body and arm made of bronze for durability. Used for all crops irrigation compatible by overhead irrigation on solid set, permanent set, hard lines, portable lines, wheel lines and mechanically moved system such as centre pivot. Also useful for areas where strong wind is prevalent.

Sprinkler Pipes

  • Provides economy and better efficiency
  • The Fittings include Quick release coupler.
  • High performance.
  • Powdered Coated.
  • Easy Connection.
  • Smooth Internal Surface.
  • Tough and Strong.
  • Light weight (up to 4-6 times lighter than G.I. Pips.).
  • Quick and easy jointing.
  • Wear and Abrasion Resistance.
  • No special maintenance required.
  • No effects of Ultra Violet Rays.
  • Inert to most chemicals.
  • Save water from 40% to 50%.
  • Save electricity.
  • Increases crops production.
  • Save labor cost and time.
  • Easy for water distribution.

HDPE Pipes and Fittings-

• Manufactured as per IS : 14151 (Part 2) in 63mm, 75mm and 90mm sizes.
• Made of 100% virgin materials.
• Homogeneous fusion welded joints.
• Molded fittings manufactured with cutting edge technology

All close spacing crops with shifting like –

• Spices
• Vegetables
• Cereals
• Pulses
• Oil Seeds etc

X

Share your requirement